auto parts

EGR Removal

Modern vehicles have made massive advances over their counterparts of older years, especially in areas such as economy, performance and exhaust emissions. Much of these advances are down to the application of technology and in particular, electronics. However, this can cause problems as vehicles become older and run for higher mileages.

EGR stands for Exhaust Gas Recirculation. This is a process that involves a small proportion of the exhaust gas from an engine being returned to the combustion chambers and is designed to reduce the amount of nitrous oxides present in car exhausts. Nitrous oxides are produced when combustion occurs at high temperatures, and the EGR process reduces cylinder temperatures, thus reducing emissions of nitrous oxides. Devised and implemented on a number of cars before the wide-scale introduction of catalytic converters, EGR systems are a common fitment on both diesel and petrol-engine cars and light commercials.

However, set up to run at their best efficiency, the vast majority of engines exhibit little difference with or without EGR fitted. Further, without EGR most vehicles run better, produce more power and consume less fuel. This is especially the case now, as modern fuels contain far fewer additives and contaminants than was the case when EGR was first introduced. Research suggests that fuel consumption can be increased by as much as 5% when EGR is used. So why do it? The answer is mostly down to the need for manufacturers to produce vehicles for a wide variety of countries, where standards of fuel can be very varied. As production and supply will be diverted to different countries based on demand and sales, the use of EGR enables manufacturers to meet emissions standards without the need to tailor electronic systems to specific markets.

In the long term, EGR systems can suffer reliability issues, especially on older vehicles or ones that have travelled high mileages. The system is an integral part of a vehicle exhaust and physically situated close to the engine. It is therefore subject to extreme temperature variation, which can lead to physical failure over time. The system can also become clogged with exhaust deposits, and this is particularly an issue for diesel vehicles, where systems can become useless even with relatively low mileages. Once problems occur, replacement is often considered the only solution, but can be extremely costly. Failed or damaged EGR systems must be attended to; however, as they can cause significant loss of performance and increased fuel consumption, and can also lead to serious engine damage.

EGR Removal is the obvious solution and is a relatively simple and straightforward job. However, simply removing the relevant parts is definitely not enough. In virtually all modern vehicles fitted with such systems, EGR removal must be accompanied by completely reprogramming the vehicles’ electronic engine management systems. Done correctly, this process will enhance fuel economy and performance and a vehicle’s emissions will be close to, if not equal to the original standard.

If your engine management light comes on, or there is an indication that the EGR system is faulty, then EGR removal may well be the best and most cost-effective option. Whatever the solution, any such problem really must be attended to as a matter of urgency, or serious and expensive engine damage can result.

tires

Signs That Your Car Needs Maintenance

Being a car owner is not simply tied to buying a car, you have to have devotion and know how to taking care of it. However is does not always apply to all of us, because there are some people who are really busy with their jobs or they’re just not into the whole getting down and dirty with cars. So without further delay, here are the not so obvious signs that means dire maintenance for your car that you should take note of.

Oil – There are several signs that your oil needs changing, if you physically check it, the color should still be within honey, once it’s black, then you need to change it. If you decide to skip the checking and go straight to driving your car, listen to the start up and running, if it is louder than usual then the oil has either been consumed by your engine or it’s very old.

Brakes – This is very important, before you decide driving away with your car try stepping on the brakes, if it feels soft or sloppy, then you need to have the brake fluids refilled, stat, or you might not get another chance.

Alignment – There are various ways of checking this, perhaps the easiest is driving straight and the streering wheel is not centered.

Tires – Put a penny between the grooves of the tires with Lincoln’s head down, if you can see his forehead then it’s a clear sign to replace your tires.

Transmission – If you ignore transmission fluid levels, you’re gonna have a bad time. New transmission can be costly to repair, so if you notice difficulties in transmission, have the fluid and filter changed.

Air filter – No need for check ups, change regularly, especially if you drive near dirt or heavy urban areas.

Engine – Perhaps the most important part of a car, although they are built to last, they unfortunately won’t last forever. Signs that you need to an engine rebuild would be if you’re consuming oil too fast, and having too much fumes in your exhaust.

Do these regularly and you might just save your future self thousands of dollars on costly repairs and irrevocable damages. And if you don’t have the time to do it, arrange a regular check up for your car with your local auto dealer, although the costs will be higher, but not as much when damage is already done.

maintenance

Choose From Different Kinds Of Auto Glass Service

Automobiles have become an integral part of our life and their upkeep is necessary to keep them in line with our lifestyle. Owing to such growing needs, there are a lot of options available on auto products and services. One such need is of auto glass service as glass is one of the most vulnerable parts of the vehicle.

Let us understand the different kinds of such services available at our disposal and how we can use them in our favor.

Windshield replacement The windshield on your car is one of its most important parts when it comes to providing safety. There are a lot of different types of them available in the market and the most popular is the one with Plexiglas layer on it. As the windshield also keeps foreign particles and wind at bay it is important that it should be kept free from cracks and chips. Running a vehicle with a broken windshield can pose danger too because of blurred vision. Hence, it is imperative that you get the windshield replaced which iscan be done by almost every Auto glass service provider.

Windshield crackand chip Repair Crack and chip repair is one of the most sought after auto glass services. Many of the service providers can fix up to three chips or even one large crack of around six inches on the windshield. The turnaround time for this service is just 15-20 minutes and a lot of different fixing methods are employed for the same.

Vent and Back window repair Every type of window installed in your car has a purpose to it. So whether it is the back window or the vent it has to be in pristine condition in order for you to make the most of it. If the vent or the back window glass in your vehicle is damaged, you should find its repair listed in the Auto glass service offered by your dealer. You can also go for car window replacement in Dallas provided by many vendors.

Window Regulators and Motor replacement Window regulator in your car is responsible for its upward or downward motion. Other than this, power windows are regulated by a motor which again help in its movement. These parts can be duly fixed by an experienced auto glass service provider within minutes. Otherwise, you can also contact vendors who offer car window replacement in Dallas for window Regulators and Motor replacement.

So choose from these auto glass services for your vehicle and keep its glass and windows free from nicks, chips and cracks.

auto parts

Is Steering Wheel Control Available After Car Dvd Gps Player Installation

Is Steering Wheel Control Available After Car DVD GPS Player Installation

With the rapid development of automobile industry, now many cars have the steering wheel control in the original car radio player. When you want to replace the car radio with a multifunctional car DVD player, you need to figure out whether the steering wheel control could be used or not. What should you do?

Compared to the traditional steering wheel, there are some function keys on both sides or bottom of this multifunctional functional steering wheel, including the sound control, air-conditioning control, car phone, constant speed cruising control system and so on.

For drivers, the multifunction steering wheel is very practical. With it, the driver is able to directly control many electronic devices in the vehicle on the steering wheel. You don’t need to look for different kinds of button on the central control console. That makes you concentrate on looking straight ahead, increasing the driving safety to a great extent. Now this kind of steering wheel is mostly widely applied some mid and high end cars. Some new family and compact cars also adopt this multifunctional steering wheel. Even though most are limited to the sound control, it still provides a lot of convenience and fun on the driving.

Now many car owners prefer to install a multifunctional car DVD GPS player so that they will have more options of in-car entertainment. When you are choosing a car DVD player for your love vehicle, what should you do if you don’t want lose the steering wheel control function?

Firstly, you need to check that whether your original CD radio player has the can bus. If it doesn’t have can bus, you just need to connect the steering wheel control wire with the car DVD player, then set the steering wheel control to make it work. For some cars which do not have the can bus, it is easy to install a double din universal car DVD gps player and make the steering wheel control to work.

If your car has can-bus, you need to be careful about it. Some cars need the can-bus to make the steering wheel control work. For these cars, you need to install the car DVD with can-bus if you want to use the steering wheel control. There are many specially designed car DVD gps for the car, especially for the car with can bus. You do not need to set the steering wheel control for these cars, since the can bus is specialized for the car. However, for some cars with the can-bus, it’s possible that some of the steering wheel control function can not be compatible with the can bus 100%. That’s because the can bus is a little different in some countries. So you need to has a detailed search when you replace your car’s original radio system with a new double din DVD player.

Steering wheel control is very useful, which will bring the drivers much more convenience, as well as increase the driving safety to a great extent. So when you install a car multimedia DVD player to replace the original car radio CD player, it is really necessary to pay more attention to this function.

tires

Ma – Fra Car Care Products of Extreme Quality

The 1965 is a very important year for the economy of a big and glorious country like Italy because in that year a great and revolutionary firm was born, I’m talking about Ma-Fra.

Ma-Fra is well known in the entire world for all its products for the car care and during the years became the leader in this field.

Ma-Fra is famous for his R&D department that every years invents new and innovative products.

The main goal of Ma-Fra is to change the way of use of those products.

This firm has a special care for the planet and produces a very innovative green line.

Saving the planet is one of the main values of Ma-Fra in fact this line uses only highly bio-degradable products like essential oils and vegetables that don’t effects the planet in any way. This line is called Eco-Maf and has a lot of very useful car care products like the shampoos and the products for the professional cleaning of the interiors and the glass of every car.

Being green is not only about using ecologic products and Ma-Fra knows it and that’s why this firm uses a very special care for the choose of dealers and suppliers of his products.

If the eco-sustainability is the main objective Ma-Fra is moving every day a step in the right direction.

But Ma-Fra is not only about the car care, is also bike care, boat care and a lot more.

Today I’d like to introduce you the boat care products , every boat owner knows how important is the care for the inside and the outside of the boat.

The boat line uses the best technology applied to detergents and chemical research.

This new line is divided in two different lines, the first one for the do it yourself lovers and the second one for the professionals.

In the DIY line we can find very useful products like Dolphy, a revolutionary product for the boat care, with it we can clean all the glass of our boats, and all the plastic parts. It’s easy to use and easy to rinse, this revolutionary product ensure the best result with the minimum effort, and using Dolphy reguarly kepps the craft clean and like new for years.

Dolphy is produced with natural products and it’s environmental friendly.

Another product that I suggest is called Woody and as the name says it’s the ideal for the wood and teak parts of the boat.

It’s a two in one products, in fact pure it clean perfectly and diluted and used regularly it gives to the wood the original beauty that your boat deserves.

maintenance

Select Best Used Car Parts

Normally used auto parts consist of car, trucks and other vehicles as well. There are plenty of websites available on the internet where one can buy used auto parts at very good deals. Many of do think that why should we buy a used auto part for my brand new car or truck? The answers is simple, if one can get the same quality in less bucks why spend extra on new ones!

What most firms do is they salvage on the parts they get from the junkyard fix them up properly before they put them up for selling purposes. For someone looking to start a used auto parts selling business, beginning with online shop is best because it is less expensive as compared to starting a business in normal market.

There number of cars produced every year especially in Australia and USA is huge, so it becomes quite difficult to recycle each and every part. Due to this the junkyard are full of unwanted auto parts. The used auto part market is filled with useless auto parts that people try to sell. So people looking for buying proper used auto part must be skilled enough to differentiate between useful parts and useless ones.

This has become a preferred business option for many people, they buy used automotive parts from junkyards at very affordable rates and then after fixing them up they are sold to the customers. This indicates that almost every salvage owner is interested in buying automotive parts which are in good working condition.

There are many varieties of used auto parts and their quality depends on various factors like its age, its material, the duration it has been used and amount of wear and tear. There are many gas stations in Australia where one can find used auto parts but the quality may not be that good. So if a person is looking for a good deal on quality used auto parts it’s always better option to buy online used car parts or from a salvage yard, they offer their customers with a variety of choices. For people who are car enthusiasts these online stores and salvage yards are best option because they can even get customized parts which will add up to the looks of their cars or trucks. The only thing one should take care of is to do a proper inspection of the shop and the used parts before buying them either online or from the real market.

auto parts

How to Increase Your Car's Trade- In Value

For every car (C) owner, the time will one day come to make a purchase of a new car. A car can be a very expensive investment (although buying used can help you to get the most bang for your buck) so it is helpful to look for any way possible to cut the cost of a new C and to make your new purchase affordable.

For many, this means trading in their own vehicle to the dealer in exchange for getting some money off of their new car purchase. Trading in your C to the dealer is, in effect, selling your old car to the dealer and putting the proceeds of that sale towards the purchase of your new used car.

Of course, this means that the better the car you have to trade in, the more your trade in should be worth and the more money you should get off of your new used C purchase.

While some factors (such as make, model and mileage) cannot be changed on your trade-in, there are certain things that you may be able to do to make the trade-in more attractive and thus worth more.

For example, some of the ways that you can increase your cars trade-in value include:

By following these simple tips, you may be able to help increase the value of your trade in. Remember, when you are getting ready to take the care in and negotiate with the dealer, you should think about the types of things that will be important to a dealer in buying a car that will be resold and you should try to make decisions on fixing up and presenting your car accordingly.

C

tires

LED OR HID?

With the advent of technology, more and more advancements are daily revolutionizing our lives. One such advancement happened when light bulb was introduced by Thomas Alva Edison. Since then, various methods are invented to light up and generate light. LED and HID lamps are also few such methods. People generally tend to use these two technical terms alternatively due to lack of knowledge. These both inventions have revolutionized our lives in one way or the other and have an entirely different meaning.

LED stands for Light Emitting Diodes, while HID mean High Intensity Discharge. HID lamps have several advantages over normally used fluorescent and incandescent lamps.

They are light sources whose fixtures are a bit different and are therefore called as high intensity discharge lamps depending upon the materials which are being employed to use in the construction. Xenon is one of such materials which are used. Hid Xenon kit has the property of emitting light when it is being hit by high voltage. They are used widely these days due to the fact that they have various positive points over conventionally used lights. They produce more brightness and consume less power compared to the former ones. Also, they are found to perform more efficiently and consistently when they encounter a continuous varying voltage or temperature fluctuations. Hence, they are also suitable for outdoor applications.

Various HID lights which are used have few drawbacks. They take time to glow brightly.

These are incapable of glowing brightly instantly but take time till they become hot. However, HID lights made up of xenon rule out this drawback and are able to glow up brightly instantly when the power is withed on just like incandescent lamps. Also, the light provided by them is more natural as compared to other variants of HID lamps.

Along with so many advantages of xenon lamps, there are few disadvantages of these. They require comparatively a high voltage, extremely high, in order to operate which make it quiet unfeasible. Voltage range should be of the order of thirty thousand volt in order to start the arc between the bulb and the electrodes.

HID bulbs do require comparatively high voltage as compared to other lightning sources, but this voltage is appreciably high for xenon bulbs which make it quiet unfeasible. Also, they require one more parameters at its extremes. They require high pressure inside the bulb at least, 100 atmospheric times. Hence, they can also serve as a great explosion threat thus risking many. This makes their use quiet restricted.

Talking about LED lightning, they use light emitting diodes made up of semiconductors. They have various advantages over normal incandescent lamps which have propagated their use manifold. The biggest advantage is that they consume less energy and thus serve as power saver. Also, they are more durable and have loner life. Their robust nature along with small size and fast switching capability, make them an essential component in designing of various electrical components.

maintenance

Taking Care of Your Car's Windscreen Properly

The windscreen is one of the most delicate parts of a modern car, despite the fact that it’s usually made with durability and sturdiness in mind. It still requires a lot of careful attention during repairs and even cleaning jobs, and it’s never a bad idea to familiarize yourself with the way a windscreen is built and how it works if you own a more expensive car. That way you’ll be able to avoid some common issues that may arise if your car is ever involved in an accident that requires a windscreen repair.

Even if it’s not about a repair, but a cosmetic fix-up like a tint job; you’ll still want to be crystal clear about what a windscreen requires in terms of quality service, and how to find the best company to work with as well. The first feature to look for, obviously, is that the company can work on modern cars and their special windscreens. This might sound a bit redundant as you’d expect that every company on the market for windscreen services is like that, but the truth is a bit different. If your car’s windscreen is a modern variant that features some strange, complex type of technology, you may find that not so many companies out there are willing to work on it.

Once you’ve found an appropriate company to do the job for you, you should also prepare your car accordingly. There are usually various things that you could do to make the vehicle more suitable for a windscreen repair or tinting job, and the company you’ve chosen to work with should be able to tell you all about that. Just listen to their advice and prepare the car accordingly, and make sure you let them know if there are any specific details about this car that they should know about before they get started (e.g. if you’re using custom-made windscreens).

If you’re tinting your windscreens, another thing to keep in mind is to obey your local laws and regulations. Most places have some limits to the amount of tint you can apply to your car’s windscreens, and this varies from one jurisdiction to another. So before you get started, make sure you familiarize yourself with your local laws and the restrictions they place on you. The windscreen tinting company you’ve chosen should be able to help you out on that if you’re feeling lost, as after all, they should be the ones that are most familiar with those regulations.

Don’t be in a rush! You should set aside some time for your window tinting job and contact the company to get it done once you feel your schedule has cleared up a bit. You shouldn’t rush them to complete the job faster, because that might compromise the quality of the final product a bit. And with window tinting, something that’s more or less permanent, you really don’t want to mess up the job. Once it’s done, you can enjoy your new tinted windows for a long, long time!

auto parts

How a New Exhaust System Transforms Your Vehicle

As a driver, you want an exhaust system that will unleash the power of your vehicle’s engine. Your car or truck is doing good and serving its purpose but there is always room for improvement in horsepower and torque. A new exhaust system not only improves the performance but also the appealing look of the car. It also gives your car the deep rumble that makes you the envy of other car owners.

An effective exhaust system should be one that will help save fuel; this is especially important due to the frequent increases in the prices of gas. The installation of a new exhaust system helps your engine release exhaust gases. This saves the engine the effort of having to push out these gases thus saves fuel especially for long distance drivers.

You need an exhaust system that will transform your vehicle. When selecting the exhaust system, you need to pick a product line that will ensure your vehicle gets a new feel and look. A good exhaust system will help reduce the back pressure in your engine, your engine will “breathe” more easily and release more horsepower and torque. The efficiency and effectiveness of your vehicle improves exponentially.

Whether you want your vehicle to produce a deep growl or a hum, you need an exhaust system that has smooth pipes to enable transmit a deep sound and mufflers that will muff the sound to your liking. There are exhaust tips that are stainless steel to prevent any rusting and are available in a wide range including single and double exits that come in different shapes. You will be able to choose the shape of the tips that looks best for your vehicle.

Exhaust systems are available that will suit whatever kind of a driver you are, be it racer or a regular driver. The best quality exhaust systems enable customization according to the kind of vehicle you own. There are diesel exhaust systems specifically designed for diesel engine application like the trucks and SUV. There are suppliers like magnaflow that provide customization at costs that vary depending on your requirements and the dealers involved.

A good exhaust system should be long lasting. An exhaust system that is designed to endure years of use and abuse lasts longer and saves you from changing it over and over which can be very expensive. The exhaust system should be easy to install and only requires the necessary hardware for installation.

You will get different advice from dealers out to sell the exhaust systems which you may install and realize they do not meet your needs. Get reliable information about exhaust systems form a dependable source.